Instalator E2 4 Kathrein_Octagon v-0,8
Код:
1. Installation SoftUSB2 and E2 - in fact, this option should be used only when installing softusb2 and E2 is the first time, or pen-and changed, or damaged we Softusb2, which reveals not display bootmenu. The function of the pen erases all existing partitions, assumes a new, reformats it, installs softusb2, installs and configures the main e2 bootmenu.
2. Installing new version of the E2 (update) - use it when you want to record a new version of the E2 to the already installed in step 1 and existing standard as a 2 point bootmenu. It works only on the installation Świerże E2 and change the entry bootmenu. No other files on the pen are not deleted.
3. Doinstalowanie new firmware E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- We give the name of the created image. Such as neutrino
- Size of the created image can be left to 256MB.
- When you create image entering to the "Manage BootMenu"
- We press download
- Zaznaczamynastępną empty position bootitem
- In the name box type the text you want to appear on the display. Such as neutrino
- Field type always choose e2 for E1/E2/Neutrino/VDR
- Select type field softusb2
- Press the question mark on the right side of the field parameters
- Mark the file you created earlier neutrino.uImage
- Field of parameters, for example, should look for example like this: .. / images / neutrino
- We press Save
- We press download to see if bootmenu been changed
- We close the program and look forward to the new firmware doinstalowanego
4. Doinstalowanego firmware update earlier E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- Box enter the same image, which was used previously. This will overwrite the old files with new ones.
- Size of the created image can be left to 256MB.
5. Removing unnecessary entries from bootmenu:
- Run the installer E2
- Enter the advanced options
- Then to manage bootmenu
- Press download
- If you have questions about the type of partition, answer truthfully ;-)
- Is characterized by the bootitem you want to delete. Of course you can uncheck any, even the middle. The rest will be poprzesuwana during a write operation
- Press Save and then download the purposes of checking whether our settings are correctly inscribed
6. Improved network configuration:
- Run with the tuner Drivers in flash
- Run the installer E2
- Enter the advanced options
- Then telnet
- We press the button "Configure network for E2
- We reaffirm that the tuner is running with the Drivers in flash
- We reaffirm that the tuner is in standby mode
- When asked "Do you use EXT3?" answer YES if softusb2 is installed on your system EXT3, or NO if the FAT
- We provide a correct gateway address
- Changing the mask, if necessary
- Waiting until the completion of the work, which show the information: